KWB Easyfire, Руководство по установке и обслуживанию, Страница: 93 / 220

Page 94 IM Easyfire 10/2008 © KWB – Kraft und Wärme aus Biomasse GmbH
9 Fabric tank 9 Fabric tank
6.) Thread the horizontal supports into the fabric tank
Now thread the first two horizontal supports through the loops of the
fabric tank.
If space to thread in the horizontal supports is limited, turn the fabric
tank 90° and pull the two loops together at door height so that you
can introduce the horizontal supports into the loops through the door
opening.
Thread in the horizontal supports
Turn the fabric tank with the horizontal supports back 90° so that the fill
nozzle is once again at the right place.
Hook the first horizontal support into the vertical support unit. Thereafter
you can also hook the second horizontal support into the opposite
vertical support unit.
Hook in the horizontal supports
Now you can introduce the other two horizontal supports.
If space is limited for threading in the horizontal supports, pull the two
loops of the fabric tank together at door height and guide the horizontal
supports into the loops through the door opening.
Introduce the horizontal supports
7.) Install the blow in nozzle
One or two blow-in nozzles are installed depending on the position of
the fill connection.
For rectangular fabric tanks, the remaining fill openings
must be tightly sealed with the sewn-in straps provided for the fill
openings.
Push the fill unit that is already installed into the fill opening in the fabric
tank after the clamp element is loosened, and then push it onto the
cross brace and again bolt in position with the loosened bolts.
The opening on the fabric tank is strapped as before to the fill pipe with
the permanently mounted strap, and is secured in addition with the
hose clamp.
Install the blow-in nozzle
MA-Easyfire 10.2008_EN.indd 94 MA-Easyfire 10.2008_EN.indd 94 30.03.2009 13:30:17 Uhr 30.03.2009 13:30:17 Uhr