14
2
INSTALLATION MATERIAL
Designation
Quantity
Hexagon nut M6
6
Serrated flange nut M6
4
Serrated flange nut M8
10
Button head screw M6 × 12
4
Flanged button head screw M6 × 16
10
Flanged button head screw M6 × 25
2
Flanged button head screw M8 × 50
6
Countersunk screw M6 × 12
2
Countersunk screw M8 × 16
4
Countersunk screw M8 × 30
4
Cap screw M8 × 16
4
Cap screw M8×20
(included for the optional bucket seat bracket)
4
Cap screw M6×45
16
Spacer sleeve
16
3 CONTENTS
After unpacking, check:
• TRACKTIME
RaceRig or other parts damaged?
•
Contents complete compared to the order? Contents see
chapter 6 „Components included Advanced Frame“ on page
.
4 ASSEMBLY STEPS
The figures of the individual assembly steps are shown from
.
Assembly step 1
¾
Lay out the main right and left-hand frame parts ready for assembly.
In the rear frame parts the smaller holes face the middle of the frame. In the
front frame parts the assembly blocks on the upper tube also face inwards.
Содержание TRACKTIME RaceRig
Страница 29: ...29 4 9 10 Abb 3 Montageschritt 3_1 Fig 3 Assembly step 3_1 Abb 4 Montageschritt 3_2 Fig 4 Assembly step 3_2...
Страница 32: ...32 1 2 3 4 Abb 9 Montageschritt 5_2 Fig 9 Assembly step 5_2 8 Abb 10 Montageschritt 6 Fig 10 Assembly step 6...
Страница 34: ...34 19 Abb 13 Montageschritt 8_2 Fig 13 Assembly step 8_2 1 Abb 14 Montageschritt 9 Fig 14 Assembly step 9...
