26 | kvm-tec
kvm-tec | 27
3. extender menu/settings
3. extender menu/settings
3.4.1 UPDATE VIA A bITMAP IMAGE
The file will be output from an image and will be copied and storede to the currently
connected extenders.
Wait until all 3 phases of the update have been completed and make sure that you have
never unplug or plug in the devices during the update.
3.4.2 UPDATE WITh USb STICK
For the update of the USb Stick the following steps are necessary:
1. you receive the message that you can plug in the USB stick.
2. copy the update file ( ending in .kvm) to the USB stick
3. make sure that the update file is directly on the stick and that it is not in any
subdirectory
4. the USB stick must be formatted with fAT-32
