16 | kvm-tec
Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
1. INTRODUCTION
kvm-tec | 17
1.6 UNPACKING AND CHECKING THE CONTENTS
Before using the product for the first time it should be checked for damage. In case of
damage due to transport inform the carrier immediately. Before delivery the product is
checked for its function and its operating safety.
• Make sure that the packaging contains the following content:
SMARTflex Single
Local/CPU Unit
1 x SV1 local/CPU
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
1 x DVI-DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
4 x rubber feet
Remote / CON Unit
1 x SV1 remote/CON
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
4 x rubber feet
SMARTflex Dual
Local/CPU Unit
1 x SV2 local/CPU
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
1 x DVI-DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
4 x rubber feet
Remote / CON Unit
1 x SV2 remote/CON
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
4 x rubber feet
1. INTRODUCTION
1.5 ABOUT THE STATUS LED
LED Status Update:
Farbe
Anzeige des Lichtes
Autoupdate Modus
fast flashing
Update runs
shining
Update failed
shining
Update successful
Meaning LED displays
Farbe
Anzeige des Lichtes
Bedeutung
shining
only network connection available
fast flashing
No active connection
shining
No video signal
shining
everything works
A detailed error description can be found in chapter
