KVM-TEC 6031, Руководство пользователя

Страница: 8 / 16

14 | kvm-tec
1. introduction
1.7 ABOUt tHe stAtUs Led
The Status LED (8/15) can light red, orange or green. Table 1 shows the meaning of each colour.
Also see chapter
Troubleshooting .
Normal Operation
* MX only ** Rem. Only
Meaning of LED indicators
colour Blinking Physical
Link Active
connection
video
extended UsB
Initialisation UsB data
received
Identify
command Autoupdate
mode
Red - Yes No No Update Failed
Red Slow No No No
Orange - Yes Yes No
Orange Fast Update in Progress
Green - Yes Yes Yes Update Succedded
Green V. fast Yes**
Red/Green V. fast Yes
Yellow - No
Yellow Slow Yes
Green - Yes
Green V. fast Yes
main Led
rJ45 Socket lEds *
kvm-tec | 15
2
1.8 UNPAckINg ANd cHeckINg tHe cONteNts
Before using the product for the first time it should be checked for damage. In case of
damage due to transport inform the carrier immediately. Before delivery the product is
checked for its function and its operating safety.
• Make sure that the packaging contains the following content:
USBflex Single copper
Local/cPU Unit
1 x UB1 local/CPU
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
1 x USB cable 1,8m/5.9ft
4 x rubber feet
Remote / cON Unit
1 x UB1 remote/CON
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
4 x rubber feet
USBflex Single fiber
Local/cPU Unit
1 x UB1-F local/CPU
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
1 x USB cable 1,8m/5.9ft
1 x SFP module multimode up to 500m (optionally with single mode up to 20km)
4 x rubber feet
Remote / cON Unit
1 x UB1-F remote/CON
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
1 x SFP module multimode up to 500m (optionally with single mode up to 20km)
4 x rubber feet
1. INtROdUctION