24 | kvm-tec
kvm-tec | 25
3. NetWORk settINgs ANd mANAgemeNt sWItcHINg sYs-
tems
All network settings, user administration and extender management are done via the included
Switching Manager software and all functions are described in the Switching Manager 2000
manual. You can download the manual from our website. www. kvm-tec.com
3.1 MATrIx SWITChIng SYSTEM
The configuration is done via the Switching Manager
3.2 POINt tO POINt cONNectION
Connect the cables - plug & play
3. ConFIgUrE ThE ExTEndEr
First
Aid
kvm-tec
smart connection
We are here for you to answer
your questions about installation?
Manual download www.kvm-tec.com
or
kvm-tec Installationchannel on our homepage
personally +43 2253 81912
kvm-tec Support
Phone: +43 2253 81912 - 30
4. FIrST AId
USB is not
working
No Power
(No LED)
Check the
powerplug
Is the power
supply ok? Try
another Unit.
Try reprogramming
the Unit by using a
JTAG programmer
Contact kvm-tec
support
Are the USB
Devices plugged
in correctly?
Is the USB cable on
the Local side plug
-
ged into the PC?
Are the USB
Devices working
directly on the PC?
Check if local and
remote Unit have
the same firmware
Replace the USB
cable from PC to
the Local Extender
Check if the local
or the remote
Unit is causing
the problem by
swaping first the
local and than the
remote Unit to
another Unit
Contact kvm-tec
support
