TracVision TV5 User’s Guide
42
Receiver Settings
Allowing External Access on a DIRECTV Receiver
For automatic satellite switching, the TV-Hub needs to communicate
with the receiver over the network. The receiver needs to be set up to
allow this external access. To allow external access on a DIRECTV
receiver, follow these steps:
NOTE: A video tutorial of this procedure is available in
(Internet access required).
1.
Press
MENU
on the receiver’s remote control to access the
onscreen menu.
2.
At the main menu, highlight
Settings & Help
. Then select
Settings
.
3.
Highlight and select
Whole-Home
4.
Highlight and select
External Device
.
5.
Set External Access to
Allow
.
6.
At the warning message, select
OK
.
Figure 5-5 External Device Settings on DIRECTV Receiver
Содержание TracVision TV6
