LNB Replacement Instructions
3
54-0310 Rev. A
6. Remove the top of the LNB clamp and remove the
LNB.
7. Place the new LNB in the clamp and reattach the
RF cable(s).
8. Replace the LNB clamp:
A. For a North American LNB, tighten the clamp
fully and skip to Step 10.
B. For a European LNB, do not fully tighten the
clamp and proceed to Step 9.
9.
(European systems only)
Carefully turn the LNB so
that the scribe mark is aligned with the skew angle
that you noted in Step 3 (see Figure 2). Then fully
tighten the clamp to complete the replacement
process.
10. Replace the vehicle fuse you removed in Step 1
and connect power to the antenna and receiver.
The LNB replacement procedure is now complete!
IMPORTANT! Before returning the LNB, be sure to obtain an
RMA number from KVH’s Technical Support Department and
write the number on the outside of the box. Shipments received
without an RMA number will be returned to you at your
expense.
