TracPhone
®
V3 Installation Checklist
Please complete to validate your installation
Installation Information
Vessel Name: ___________________________________ Customer Name: ___________________________________
Antenna Serial Number: ___________________________ Installation Date: ___________________________________
Installing Technician: _____________________________ Installing Company: _________________________________
Company Address: _________________________________________________________________________________
City: __________________________________________ State/Province: _____________________________________
Postal/Zip Code: _________________________________ Country: __________________________________________
Phone Number: _________________________________ E-mail: ___________________________________________
Installation Quality Check
Antenna Unit
The antenna is mounted in a blockage-free area, with a clear view of the sky.
Location description: ________________________________________________________________________
The antenna is mounted away from other antennas and compasses and outside the beam path of radar(s).
The antenna is mounted on a flat, level surface/pedestal capable of supporting the antenna’s weight of 25 lbs
(11.3 kg) under all environmental conditions.
RF radiation exposure was taken into consideration when choosing a mounting location.
The “Forward” arrow inside the baseplate is pointing towards the bow and is parallel to the vessel's centerline.
Both shipping restraints have been removed.
The cable access hole was sealed as necessary to prevent water from seeping into the vessel.
Anti-seize lubricant was applied to all four mounting bolts.
The four rubber feet are bottomed against the mounting surface and the foam seal surrounding the cable access
hole is fully compressed.
Belowdecks Equipment
All belowdecks equipment is installed in a dry location that provides good ventilation.
Location description: ________________________________________________________________________
The front panels of the control unit and modem are easily accessible to the user.
All cables are strain-relieved at the back of the modem and control unit using the supplied bracket(s).
If the customer has a wireless access point (WAP), it is placed in a location that provides good WiFi reception.
50-0138_C
KVH Industries, Inc. • 50 Enterprise Center • Middletown, RI 02842-5279 • U.S.A. • Tel: +1 401 847-3327 • Fax: +1 401 851-3823 • E-mail: [email protected]
KVH Industries A/S • Kokkedal Industripark 2B • 2980 Kokkedal • Denmark • Tel: +45 45 160 180 • Fax: +45 45 160 181 • E-mail: [email protected]
©2011-2012 KVH Industries, Inc. KVH and TracPhone are registered trademarks of KVH Industries, Inc.
Continued on reverse...
