KVH Industries TracPhone FB150, Руководство пользователя

Страница: 78 / 140

Chapter 4: Using the web interface
Setting up the interfaces 69
Enabling PPPoE (Point-to-Point Protocol over Ethernet)
What is PPPoE
By using PPPoE, users can virtually “dial” from one machine to another over an
Ethernet network, establish a point to point connection between them and then
securely transport data packets over the connection.
On the equipment connected to the TracPhone FB150 terminal you must enter a few
settings for your PPPoE connection. For example you need to set up which service to
use and possibly a user name and password. For details, refer to Using PPPoE (Point-
to-Point Protocol over Ethernet) on page 32 and to the documentation for your
connected equipment.
On the TracPhone FB150 terminal you must enable PPPoE before you can establish a
PPPoE connection. Refer to the next section.
Enabling PPPoE in the TracPhone FB150 terminal
To enable PPPoE in the terminal do as follows:
1. Select SETTINGS > LAN > PPPoE .
2. Select Enabled .
3. Click Apply .