KVH Industries TracPhone FB150, Руководство пользователя

Страница: 67 / 140

Chapter 4: Using the web interface
Setting up the interfaces 58
Port forwarding
Port forwarding enables you to set up a server connected to the terminal while the
terminal is in Router mode. Without port forwarding it would not be possible to
contact the server from the Internet.
The terminal is normally in Router mode if you are using the Default network user
group. We recommend using a static public IP address for the terminal in order to
provide easy access to the terminal. For information on how to set up a static IP
address, refer to step 5. on page 61 in the section Setting up the Default network user
group .
The following example shows how to allow Internet access to a mail server (smtp)
connected to the terminal.
The mail server in this example has the IP address 192.168.0.100.
1. Select LAN > Port forwarding in the left navigation pane.
2. Select Enabled to generally enable port forwarding.
3. Type in the Incoming port range .
4. Type in the Destination IP address, which in this example is the IP address of
the mail server: 192.168.0.100.
5. Type in the Destination port range .
6. Repeat step 3. to step 5. to set up port forwarding to additional servers.
7. In the Active column, select which ports should have port forwarding activated.
8. Click Apply .