KVH Industries TracPhone FB150, Руководство пользователя

Страница: 65 / 140

Chapter 4: Using the web interface
Setting up the interfaces 56
Configuring the LAN interface
Overview
The TracPhone FB150 terminal has 2 LAN connectors with PoE (Power over
Ethernet).
Some of the LAN parameters are set up in the network management pages, which
require administrator password.
Setting up the local LAN IP addresses
In the web interface you can set up the IP addressing between the terminal and
devices connected to the terminal. The terminal has a built-in DHCP server which
can be used to dynamically assign IP addresses to devices connected to the terminal.
You can also set up the local IP address used by the connected devices to access the
terminal. The drawing below shows the default setup.
CAUTION! All connections to the LAN interface may be affected when
you change the following settings. This also includes your own current
connection to the web interface.
A ss igned b y the
termin a l (DHCP)
Device 1
A ss igned b y the
termin a l (DHCP)
Device 2
192.168.0.1
Terminal
192.168.0.1
Local IP Addresses
(Def au lt S et u p)