background image

Chapter 5: Troubleshooting

Status signaling

110

Status signaling

Overview

There are many ways of troubleshooting if an error occurs. The terminal has 

different means of status signaling, to help you find the cause of a problem:

Indicator

.

• Event messages.
• Event log.

Indicator, event messages and logs are described in the following sections.

General status indicator functions

Power indicator

Event messages

Display of event messages

The terminal can detect events during POST (Power On Self Test) or CM 

(Continuous Monitoring). When the terminal detects an event that requires your 

action, it issues an event message.
You can see the active event messages in the web interface by clicking the warning 

symbol in the icon bar at the top in the web interface. You can also see the messages 

in the IP handset.
All events are logged in the event log. For information on the event log, see 

Viewing 

the Event list or the Event log

 on page 102.

Behavior 

Meaning

Green

Power OK.

Flashing green

The terminal is powering up.

Flashing orange The terminal is closing down.

Off

No power.

Содержание TracPhone FB150













































































































































Отзывы: