KVH Industries TracPhone F55, Руководство по установке

Страница: 66 / 157

Chapter 9: Setting Up the System
44 Powering Down the System
9.2 Powering Down the System
Press and hold the power button for a few seconds, while the handset display
shows the message shown below.
Let go of the button when the display shows the message below, and the
green LED on the front of the terminal starts flashing.
9.3 Service User Menu
Before the system is ready to make the first call – some basic system
configuration is necessary.
The system configuration is carried out by the Service User, who has access to
all functionality in the BDU Unit.
The system configuration can be done via the handset or by running the
FleetCp program from a PC connected to the BDU.
See User Manual chapter 5, System Set-up from PC.
All configuration information is stored in the configuration module. It takes
approximately 10 sec. for the system to update and store configuration
information. When configuration information is changed or added
wait min.
10 sec. before powering down the system.
Note
Wait at least 5 seconds after a power down, before trying to power
up the F55 or F77 again.

Powering
Down

Thrane F77
Goodbye