Setting up work
31
Adjusting the rotor
pitch
It is possible to adjust the position of the rotors lateral to the direction
of travel.
On the side opposite the swath former, the distance between the tines
and the ground must be approximately 20 mm greater than on the
swathing side.
Remove the tine support above the wheel carrier.
Undo the four bolts on the wheel carrier slightly.
Push the wheel carriers into the required position.
Retighten the bolts to a tightening torque of 85 Nm.
Fit and secure the tine supports.
20 mm
Collecting the crop increases the distance between the
tines and the ground.
M 12 bolts to 85 Nm
Wheel carrier
