Kverneland IsoMatch Global, Быстрый старт

Страница: 7 / 19

5 Installation
Mounting the IsoMatch Global GPS antenna
The IsoMatch Global GPS antenna can be mounted in two ways:

Magnetic mount

Surface mount
Magnetic mount
The magnetic mount can be screwed into the bottom of the antenna and mounts to metal surfaces.
A metal disc and foam adhesive are included with each magnetic mount.

Use the foam to bond the metal disc to the desired mounting location, if there are no metal surfaces.
To use the metal disc and foam adhesive:

Clean and dry the mounting surface of the vehicle.

Remove the backing from one side of the foam adhesive and press the metal plate on it.

Remove the backing from the other side of the foam adhesive.

Press the metal plate onto the mounting surface of the vehicle.

Apply firm pressue to ensure good adhesion.