Kverneland CLC Evo Скачать руководство пользователя

Страница: 66 / 86

Maintenance

Cleaning



The equipment may be cleaned using a high pressure cleaner.



Move the water jet further away when cleaning the bearings to
avoid damaging the seals and roller bearings.



Protect the cylinder rods.

Maintenance

To ensure that the machine has a long service life, we recommend that
a protective coating of oil is applied at the end of each season. Use
only a suitable, biodegradable oil such as rape seed oil.

Storage

To keep your machine in good condition during storage:



Clean it.



Lubricate the various points listed in the “Maintenance” section.



Store your machine on a flat, stable surface.



Machines stored in unfolded position: grease the cylinder rods
before you use the machine.



Check the tire pressure.

IMPORTANT

Do not clean using a rotating nozzle

Never use a high pressure cleaner with a rotating nozzle to clean
your machine. This could damage the machine.

IMPORTANT

For wheels with rubber tires:

Cover the tires before applying oil. Oil can damage tires.

Model

Tire

Recommended

pressure

Depth control

wheels

6.00 - 9

6 bar

(87 psi)

Depth control

wheels

10/80 - 12

3.9 bar

(57 psi)

Содержание CLC Evo























































































Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды

Kverneland CLC Evo, Руководство пользователя

Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды