Kverneland a-drill Скачать руководство пользователя

Страница: 7 / 115

Safety

Safety regulations

Maintenance

The brakes or vehicle immobilisation system must be engaged before

all interventions within the radius of the tractor - tool unit.

Wear safety gear (helmet, safety shoes, gloves, etc.) when changing

parts on the machine.

You are advised to be careful with all parts with sharp edges or

corners.

Before welding, disconnect the electric units and disconnect the

tractor alternator and battery.

Never direct the jet of high pressure cleaners directly onto the

bearings, the hydraulic hoses, electric units or other sensitive

components on the machine (risk of damage).

The jet may bounce back off some surfaces.

Hydraulic system

The hydraulic system is pressurised.

Identify the connectors using a colour code, as indicated in the user

manual, when intervening on the hydraulic system.

Incorrect connections and the reversal of functions could cause

serious injuries.

Before any intervention on the hydraulic system:



Block the folding extensions in their rest position.



Block the hydraulically controlled accessories in their rest

position.



Reduce the pressure.



Stop the tractor engine.

Содержание a-drill




















































































































Результаты поиска

Содержание a-drill

Отзывы:

Похожие инструкции для a-drill

Бренды по названию

Популярные бренды

Kverneland a-drill, Руководство по эксплуатации

Результаты поиска

Содержание a-drill

Отзывы:

Похожие инструкции для a-drill

Бренды по названию

Популярные бренды