Kvaser BlackBird Getting Started Guide
44 (47)
9.11
Scan for Kvaser BlackBirds
Using the Kvaser Network Device Selector tool, scan the network once again.
Check the LEDs on the Kvaser BlackBird. The INFO LED should flash a few times
when scanning is in progress.
9.12
Add the device manually
In the Kvaser Network Device Selector tool, press the Add button. The following
dialog will appear:
Figure 34: Adding device manually.
If the Kvaser BlackBird is absent from the scan list, you can manually enter the
device data here. Enter the following information:
•
Check Connect to this device if you want the service to connect to it
whenever it becomes available.
•
Enter the IP number or the DNS name (host name) of the device.
•
You can use the Search button to look up the IP number in DNS, and to
check whether the device is reachable.
•
The EAN number and serial number are filled out automatically when you
use the Search button.
•
Enter the network connection password to the device, if needed.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
