Kval DL-NCD, Руководство по эксплуатации

Страница: 33 / 144

About the Libraries Screen
KVAL Operation Manual
2-3
About the Libraries Screen
Libraries add to the versatility of
KvalCAM
. The libraries are a working data base of stored cuts,
door parameters, and door jobs.
A list of doors/door jobs is displayed under the
Door Job Library Tab
while feature groups are
listed under the
Feature Group Library Tab
.
Door specifics can be created, edited, cloned (copied), or deleted directly at the Operator’s Sta-
tion. Select the
Libraries Tab
to jump to these screens.
Distinguish between the Door Job and Features Group Libraries
One can describe the
Features Group Library
as a virtual “scratch pad” and the
Door Job Library
as
the engine to run the door through the cutting process.
In the
Features Group
creation screen, door cuts an be created and verified by way of the
Job Pre-
view
screen.
In the
Door Job
creation screen, door cuts can be created, the door parameters stored and machin-
ing of the door can be processed using this information.
Detail Feature Group Door Job
Saves Cut Information Yes Yes
Saves Door Parameters
No Yes
Number of Feature Groups Allowed
1 Many
Load Work Onto Machines (Cut Doors)
Yes Yes