KV2 Audio VHD 2000, Руководство пользователя

Страница: 7 / 30

VHD2000 · Features · Front panel
8) Input Impedance
This rotary switch sets the Input Impedance of the VHD2000 to match that of the mixer or other device supplying the audio
signal to the VHD2000's input. This is especially important when driving longer cable runs and it enables the line to be driven
correctly without any losses or other interference. Ideally an LD4 line driver should be used. See Using the System.
9) Tilt
This switch when depressed electronically 'tilts' the dispersion of the VHD2.0 down vertically by 10°. The Tilt switch should
only be used when a single VHD2.0 system is being used..
10) Master Level
This is the master level control for the system and will affect both the VHD2.0 and the subwoofer outputs.
11) Sub A / B Level
These are the level controls for the Sub A and B outputs; they are 'post' the Master Level control.
12) Full Range Vocal
When this switch is activated it enables the VHD2.0 to be used as a full range system without the need for subwoofers, ideally
suited to vocal reproduction and light music applications. The VHD2.0 will run full range with a 60Hz roll-off added to
the system for protection. Note in this mode the subwoofer outputs will be muted to prevent incorrect use of the system.
6
VHD2000 · F
ea
tur
es · F
ron
t panel