KV2 Audio VHD 2000, Руководство пользователя

Страница: 6 / 30

5
VHD2000 · F
ea
tur
es · F
ron
t panel
VHD2000 · Features · Front panel
Front Panel
1) AC Mains Switch
The VHD2000 has a combination AC Mains switch/circuit breaker on the front panel. If the switch shuts off during normal use,
push it back to the ON position once. If it will not stay on you should take the unit to qualified service personnel to have it
serviced.
2) Power / Service LED
This is a dual colour LED, when green it indicates that the AC power is on. When red it indicates that there is a fault condition
sensed within the VHD2000 and that the unit needs servicing.
3) Limit / Thermal LED
This is a dual colour LED, when green it indicates that the audio limiter has been activated. When red it indicates that
the thermal limit of the VHD2000 has been exceeded and the unit has shut down because of this.
4) Improper Use LED
If the VHD 2000 is connected improperly then this LED will light and the unit will shut down. An example of this is if a full
range signal is applied to the 'Mid/Hi In' rather than the 'Main Input', the VHD2000 will sense this and shut down to further
protect any damage occurring to loudspeakers that are connected to it.
5) Signal LED's
These LED's give visual indication of the level of the input signal applied to the 'Main Input'.
6) Sub A & B Set Up
These switches are set according to which combination of subwoofers is being used with the system - see Operation Modes.
7) System Single / Double
This switch sets the controller for use when either a single VHD2.0 is being used or a double system using 2 VHD2.0's are
being used. In this mode another VHD2000 would be required to power the second VHD2.0 and both switches should be set
to 'Double'..
1
12 11 10
2 3 4 5 6 7 8 9