KV2 Audio VHD 2000, Руководство пользователя

Страница: 10 / 30

VHD2000 · Using the system
9
VHD2000 · U
sing the sy
st
em
Full Range Vocal Mode
If the VHD2.0 is being used solely for vocal reinforcement & light music playback then the VHD2000 is used with the
associated 'Full Range Vocal' switch depressed. A 60Hz roll-off is added to the system to protect the VHD2.0.
In this mode the subwoofer outputs will be muted to prevent incorrect use of the system.
Using the Mid/Hi Insert
The Mid/Hi Insert point gives you the ability to 'insert' a signal processing device into the mid/hi signal chain. For instance in
some instances it may be necessary to 'delay' the signal going to the VHD2.0 using a delay line. The Main Input is used as
the system input, as per Normal Mode, but the Mid/Hi insert switch is switched to 'Engage'. A feed is taken to the delay line from
the 'Pre Control Out' connector and the return from the delay line is connected to the 'Mid/Hi In' connector as per the diagram.