Küschall® K-Series
6.6 Castors
6.6.1 Replacing the castor wheel
IMPORTANT!
The following sub-assembly contains pre-coated screws.
– Only use original Invacare spare parts.
– If the screws need adjustment, replace by new ones.
Only use original Invacare spare parts. Any change in the adjustment of these screws requires a change of screw.
Allen key (3 mm)
■□□
1.
Remove the screws
A
and washers
B
.
2.
Remove the castor wheel
D
from the castor fork
C
.
3.
Place the sleeves
E
in the bearing of the new castor
wheel.
4.
Place the castor wheel with sleeves in the required
position of the fork.
5.
Secure the castor wheel to the fork using screws and
washers.
A
= 4 Nm
Function check:
The wheel may not wobble, but must rotate easily.
32
1659339-A
Содержание K-SERIES
Страница 11: ...Instructions 6 Instructions 1659339 A 11 ...
Страница 42: ...Küschall K Series Front side Rear side 42 1659339 A ...
Страница 43: ...Notes ...
