Küschall Compact FF, Руководство по обслуживанию, Страница: 21 / 56

Instructions
1. Secure the telescopic tube B to the rear frame A at
the required height using bolt
G
, washer and nut.
2. Press the cover cap F onto the end of the telescopic
tube.
3. Push the hook and loop bands C onto the telescopic
tube.
4. Push the holder E onto the telescopic tube and fix in
place by tightening the clamp bolts.
5. Install the end band D onto the telescopic tube and
secure with screw H .
6. Install protective cushion.
G
= 7 Nm
H = hand tight
6.3.12 Installing angle-adjustable Backrest with height-adjustable Push Handles
Allen key (4 mm, 5 mm) / Socket spanner (8, 10) / Phillips screwdriver (4) / Open-end spanner (10)
■■□
Shorter rear frame (variant III) required.
1. Push the lower joint pin B into the rear frame A and
fix it using bolt M , washer and nut.
2. Fit backrest tube F onto the upper joint pin C using
bolt L , washer and nut.
3. Assemble the upper and lower joint pins (
C
and
B
)
and secure with a bolt and nut D .
4. Set the desired backrest angle and secure in the nearest
hole using bolt and nut
E .
5. Retighten the bolt and nut D .
6. Push the single hook and loop band H and then the
other hook and loop bands I and the end band J over
the backrest tube
F
.
7. Push in the push handle G completely.
8. Using the clamp bolt
K
fit the push handles through
the telescopic tube F .
9. Fix the end band
J
onto the telescopic tube with screw
N .
D = 13 Nm
E = 13 Nm
L
= 7 Nm
M = 7 Nm
N
= hand tight
6.3.13 Replacing the foldable Push Handle
Hole punch pliers (6 mm) / Allen key (3 mm, 4 mm)
■□□
1659353-A 21