background image

 

 

 

 

 

Young Chang Co., Ltd. 

 

2003. 

 

Subject to change without notice. All trademarks are the properties of their respective owners.

 

Part No. 910361, Rev. B

 

KSP8 mLAN I/O Option (KMLN8)

Installation and Usage Guide

 

This document explains how to install and use the Kurzweil KSP8 mLAN I/O Option, which adds FireWire 
connectivity for MIDI and audio to your KSP8. Please check the www.kurzweilmusicsystems.com website for the 
latest updates to drivers and documentation.

 

Other I/O Options for the KSP8

 

The following I/O Option boards are also available for the KSP8:

 

 

Analog I/O Option Board

 

 

ADAT–TDIF I/O Option Board

 

 

AES I/O Option Board

I/O options are user-installable; no special expertise or special tools are required. Furthermore, the installation 
procedure is the same for all the option boards.

IMPORTANT: The I/O option boards are not hot-swappable. You must turn off the KSP8 before you add or 
remove an I/O option board. We also recommend that you power down all devices when connecting FireWire 
cables.

 

Before Beginning the Installation

 

You should back up any objects (presets, chains, or studios) that you have created. You can either save the objects 
to a SmartMedia card or dump the objects via MIDI using a SysEx dump. Refer to Chapter 10 of the 

 

KSP8 User’s 

Guide

 

 for information on these procedures.

Содержание KMLN8

















Отзывы: