Kurzweil HUB7, Руководство пользователя, Страница: 35 / 56

2-1
Chapter 2
Using the HUB7
Adding a HUB7 to your KSP8/RSP8 setup allows you to access
up to 7 KSP8s from a single RSP8. The HUB7 also serves as a
repeater, allowing you to greatly extend the cable distance
between KSP8s and an RSP8.
The illustration below shows the HUB7 front panel, including all
of the indicators and ports:
•
The 7 KSP8 ports connect to up to 7 KSP8 and compatible
units.
•
The Port Selected LED glows red if the KSP8 connected to
that port is currently selected.
•
The RSP8 port connects to the single RSP8 in the system or to
another HUB7.
•
The RSP8 port LED glows red if power is being applied to the
connected RSP8 or second hub.
•
The power jack accepts power from a DC power adapter to
operate the HUB7 and connected RSP8.
•
The Power LED indicates that the adapter is connected and
operating.
The HUB7 comes with a pair of two meter cables.