Kurzweil Flash Play PC4, Руководство музыканта

Страница: 80 / 335

Program Edit Mode
The LAYER Page
3-44
The LAYER Page
Use the Layer page to set the current layer’s keyboard range, velocity range, and other layer
specific parameters.
Low Key, High Key
Use the Low Key and High Key parameters to set the key range for the current layer. The
Low Key and High Key parameters set the lowest and highest active notes for the current
layer. The standard MIDI key range is C 1—G 9 (0-127). Middle C is C 4.
Low Velocity, High Velocity
Use the Low Velocity and High Velocity parameters to set the velocity range for the current
layer. The Low Velocity and High Velocity parameters set the lowest and highest active
velocities for the current layer.
Velocity values are set in 8 standard musical dynamics markings (ppp-fff). The 8 available
dynamic levels each account for a range of 14-16 velocities out of velocities 1-127. This
allows for velocity switching between up to eight layers.
For finer control of velocities levels or velocity switching between up to 32 layers, follow
these steps:
1. Set the Low Velocity to ppp, and High Velocity to fff.
2. Set the Layer page Enable parameter to GAttVel (Global Attack Velocity).
3. Set the Layer page Enable Sense parameter to Normal.
4. Set the layer’s velocity range in values 1-127 using the Enable Low and Enable High
parameters.