Kurzweil Flash Play PC4, Руководство музыканта

Страница: 237 / 335

Multi Edit Mode
RIFF Page
7-31
In Multi Mode, the CC Sequencer works the same as in Program Mode, except there is one
CC Sequencer per Zone. The CC Sequencer in each Zone can each have different settings,
and they can be played at the same time.
Import CC Sequencer Settings (IMP SEQ)
Press the IMP SEQ soft button to copy the CC Sequencer settings from the Program of the
currently selected Zone into the CC Sequencer page of the currently selected Zone.
RIFF Page
Riffs are full songs or individual tracks of a song created in the PC4’s Song mode that you
can trigger in Multi mode. Standard MIDI files may also be imported to Song mode and
then used as riffs in Multis. Every zone in a Multi can have it’s own riff—a completely
independent sequence. You can use a Multi with many riffs to trigger and stop looped
sequences of different instrument parts. Alternatively, a single riff can play multiple
instrument parts, and each riff can be used as a different song section of a backing track.
Follow these steps to use a riff:
1. Go to Song mode and find or record the song that you wish to use for your riff. Note the
song ID#, as well as the desired track and start/stop points.
2. Go to Multi mode and edit a Multi. On the Multi Edit Overview page, choose the
program that you want to use for the riff on the current zone. (Program changes that are
recorded in song mode will be ignored when using the song as a riff in a Multi.)
3. Go to the RIFF page, set the Riff to On, then select the desired song, track, song Start/
Stop points. See below for descriptions of these parameters, as well as many other
parameters that determine the behavior of a riff.
Note: By default, setting a zone to trigger a riff will disable the ability to play notes of that