Kurzweil Flash Play PC4, Руководство музыканта

Страница: 21 / 335

Getting Started
PC4 Sounds
1-12
PC4 Sounds
The PC4 contains Programs and Multis. A Program is typically a single instrument sound
such as a Piano, Organ, or Synth. Programs are organized by instrument type in 13
categories.
A Multi is a combination of Programs arranged as layers and/or splits across the keyboard.
Multis are not categorized by instrument type, so the KEYPAD button is always on when in
Multi Mode.
Selecting Programs
In Program Mode, use any of the methods below to select a Program.
Browse All Programs
Make sure the USER button is off, then use the Alpha Wheel or PREVIOUS and NEXT
buttons to select a Program from all of the available Programs.
Select a Program by Category
Make sure the KEYPAD button is off, then press one of the CATEGORY buttons to select
the first Program of a category (or the current Category Default Program). The selected
CATEGORY button will turn on. Use the Alpha Wheel or PREVIOUS and NEXT buttons
to select Programs from the selected category.
Select a Previously Saved User Program
Press and turn on the USER button, then use the Alpha Wheel or PREVIOUS and NEXT
buttons to browse only User Programs. To return to browsing Factory and User Programs,
press and turn off the USER button.
Select a Program by ID Number
Press and turn on the KEYPAD button. The keypad button allows you to use the numbers
labeled on the CATEGORY buttons to select Programs or Multis by ID number. Type an ID
number followed by pressing the ENTER button to select the associated Program.
Select a Category Default Program
Each category has a Category Default Program (the Program which is selected when each
CATEGORY button is pressed). By default the Category Default Program is set to the first
Program of each category. To set a different Category Default Program, select a Program,
make sure the KEYPAD button is off, then press and hold the currently lit CATEGORY
button.