Kurzweil ExpressionMate страница 79 Скачать руководство пользователя | Manualshive

Страница: 79 / 138

background image

The Arpeggiator

Arpeggiator parameters

69

Ctlr#49 Off

->On while keys are held then releasing the keys:

This will arpeggiate the pattern being played up to 16 notes.
Keep in mind, you can hear a lot more than 16 depending on how
the Arpeggiator is set, but its pattern is built from those 16 notes.
As long as Ctlr#49 is on added notes you play will sound
normally and will not be arpeggiated. When Ctlr#49 is turned
On->Off and you are not playing any keys, the pattern stops. If
you hold keys down and turn off Ctlr#49 the notes you are
playing will begin to arpeggiated.

Ctlr#49 Off

->On while keys are played and held:

Play a chord and turn on and off Ctlr#49 without releasing the
keys. Each time you turn Ctlr#49 on and off, upon the release of
Ctlr#49, the Arpeggiator resets the note order to the Þrst note
seen. This allows you to change the order of the notes within the
rhythm being arpeggiated.

Keys 2

- Works the same way as Keys1 except the clock is never

resynced.

OverPlay

- This mode requires Ctlr #49 in order to hear the

arpeggiation. When you play notes with Ctlr #49 turned Off, they
sound normal and are not arpeggiated. When you turn Ctlr #49
On, the clock is resynced, and any notes currently being held will
be arpeggiated. Any notes played after Ctlr #49 is turned On will
be played normally and will not be arpeggiated, allowing you to
Òplay overÓ the arpeggio. This Overplay feature is very similar to
the Keys 1 and Keys 2 modes - the difference is that notes played
when Ctlr #49 is Off are not arpeggiated whereas in the Keys
modes, they are.

Arpeggiation

- No sound is heard until the Ctlr#49 is turned on.

Once Ctlr#49 is on any keys held will begin to arpeggiate and the
clock is resynced. Added notes will join the arpeggiation but will
not latch into the pattern. When you release the added notes they
will no longer play in the arpeggiation.

Add

- Notes Þrst played sound normal. Notes held when Ctlr#49

is turned on will begin to arpeggiate. Added notes will be added
and latched into the arpeggiation up to 16 notes. Turn off Ctlr#49
to stop the arpeggiation.

«
...
77
78
79
80
81
...
»

Содержание ExpressionMate











































































































































Отзывы:

Нет отзывов

Похожие инструкции для ExpressionMate

Бренд: Hama Страницы: 10

Бренд: Hama Страницы: 10

Бренд: PAC Страницы: 15

Wireless Multi-Touchpad

Бренд: SIIG Страницы: 8

Бренд: Vaporesso Страницы: 28

Бренд: Sandstrom Страницы: 56

Бренд: XUMA Страницы: 8

Бренд: Saab Страницы: 9

Бренд: Darfon Страницы: 4

Бренд: Naxa Страницы: 20

Rechargeable Stopwatches

Бренд: TTS Страницы: 8

BOOKMAN COL-2010

Бренд: Franklin Страницы: 29

Бренд: Korg Страницы: 32

Бренд: KAP Страницы: 37

Бренд: L3 Systems Страницы: 8

Бренд: Franklin Страницы: 12

PortaSound PSS-280

Бренд: Yamaha Страницы: 40

LED Tail Lights for 1970 Chevelle LAT-NR320

Бренд: Dakota Digital Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды