Kurz 410FTB, Руководство по эксплуатации

Страница: 19 / 165

Kurz B ‐ Series Operations Guide 1– 6
B ‐ Series Flow Meter Modes & Menus
Once bootup completes, the flow meter automatically goes into Run mode.
An error message indicates the unit has failed boot ‐ up testing due to a sensor mismatch, wiring,
or other problem.
•
The device will cycle through boot testing again until the issue is resolved
(for firmware 2.03 and earlier).
Note
Downloading the Min/Max, Event, and Trend logs is not possible until
boot testing completes successfully.
•
You can force a boot exit by pressing the C key.
Once bootup completes you can start downloading the Min/Max, Event, and Trend logs.
Run Mode
Run mode is the normal operational state of the meter after Boot ‐ Up mode. The default display
format in Run mode is “scroll all.’ The following example shows the flow meter’s tag name and
flow:
TAG NATURAL GAS1
FLOW 0.0000 SCFM
Firmware version 2.0 and higher allows you to determine how process variables appear in Run
mode. Setting the Run mode display format is available by selecting option 7 in Program mode
with the Advanced access code. You can also access the Run mode display format by selecting
option 1 in Program mode with the Basic access code, although you must scroll through
the entire basic setup. See Option 7 in the Program Mode — Advanced Access chapter for more
information.