Kurtz Ersa IRHP 200, Руководство по эксплуатации

Страница: 20 / 32

20
3BA00133 • 2013-06-25 • Rev. 5 ersa IRHP 200
Technical Data/Safety information
2. Technical Data
Control station 4500 D
Operating voltage 115/230 V~, 50 – 60 Hz
Fuse recommended series fuse with 16 A
Output 3000 W (ohm resistive load)
Control technology SENSOTRONIC with digital PID behaviour
Control accuracy less than 2 % from temperature accumulated value
Temperature sensor thermocouple type J (Fe-CuNi), type K (Ni-CrNi)
Temperature range continuous, 50° C – 600° C (122° F – 1112° F)
Function display 4-character LED display with menu control
Power cable 1.5 m PVC grounded power cable
Heating plate
Dimensions Length 300 mm
Width 250 mm
Height 90 mm
Heated area 260 x 135 mm
Power 800 W
Voltage 115/230 V~, 50 – 60 Hz
Heating element 2 ceramic IR-emitter, wave length 2 – 8 µm
Temperature sensor thermocouple type K
3. Safety information
Attention burn hazard!
The heating element becomes very hot during operation. Flammable or
explosive (battery, electrolytic capacitor) objects, liquids, and gases, must
be removed from the work area of the device. Hot housing elements
should not be brought into contact with the skin or materials that are
sensitive to heat.
Attention burn hazard!
The housing elements are still very hot in the cool-down phase after the
device is switched off