Kurtz Ersa HR 600/2 Скачать руководство пользователя страница 162

Страница: 162 / 169

9 | Service and maintenance

Service work to be performed annually

9.6 Service work to be performed annually

9.6.1 Visual inspection and lubrication of the X and Y axles

If dirty, or at least every three months, lubricate the two guide rails of the X and Y
axles.

NOTE

For lubrication, a thin film of grease is enough!

If the drive components are excessively lubricated, they get dirty very quickly. Clean
dirty drive components before lubrication!

a) With the Rework System controller, move the X axle to the right and the Y axle

all the way forward.

b) Visual inspection of the X and Y axles Clean dirty axles with a lint-free cloth.

c) Apply a thin layer of suitable grease (such as Klüber GL261) to a lint-free cloth.

d) Lubricate the two guide rails of each axle with it.

Ersa GmbH

3BA00207_01 Operating Instructions HR 600_2 | Rev. 3

162 / 169

Содержание HR 600/2










































































































































































Результаты поиска

Содержание HR 600/2

Отзывы:

Kurtz Ersa HR 600/2, Перевод оригинального руководства по эксплуатации, Страница: 162 / 169

Результаты поиска

Содержание HR 600/2

Отзывы: