Kurtz Ersa HR 550 XL, Перевод оригинального руководства по эксплуатации

Страница: 76 / 157

6 | Function description
The [Archive] tabulator
6.6 The [Archive] tabulator
All started as well as aborted processes are saved in the archive as graphical charts
with all set soldering parameters. These processes are listed in tab [Archive].
Rework Archive User administration Profile management Administration Manual mode
Desoldering
Search
Profil Init Temp
Placement Inspection Soldering Inspection
View chart
Process automation
Max Temperature
TL
TP
Lens
pipette
Tracking ID Date User Profile name Board
Component
from: to:
In table [Archive], click on a process record to display the soldering profile details
and the corresponding chart. The graphical elements of the chart can be exported
as image files. The following functions are available in the [Archive]:
– [Search]: Search for letter sequences within the whole table contents. The
search will automatically start after entering the first character.
– Button [View chart]: The highlighted chart will be displayed. For more informa-
tion, see below in Chapter [View chart]. Charts that have no temperature re-
cord cannot be displayed.
– [from:]/[to:]: filtering processes by date.
The greyed-out column on the right shows further details of the highlighted pro-
cess:
– [Profil Init Temp]: Temperature from which the process record begins.
– [Max Temperature]: Highest measured temperature in the soldering process.
– [TL]: Liquidus temperature entered for the process. No function, freely ad-
justable in the chart.
– [TP]: Only when desoldering. Pipette temperature at which the pipette moves
to the component to lift it.
– [Lens]: Lens used in the process. Without function, can be freely adjusted in
the chart.
– [pipette]: Pipette specified in the process. Without function, can be freely ad-
justed in the chart.
Range [Process automation] under the table shows the process steps adopted.
Ersa GmbH Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1 76 / 157