Kurtz Ersa HR 550 XL Скачать руководство пользователя

Страница: 30 / 157

4 | Transport, installation, storage, disposal

Information concerning machine transport and storage

4.1 Information concerning machine transport and storage

CAUTION

Material damage is possible!

The machine is supplied in a sturdy carton on a pallet. Damage caused by im-
proper storage or improper transportation is not covered by warranty!

a) Always transport or store the machine in a box on a pallet!

b) During the machine transport, avoid any jerky movement, abrupt setting-down or

bumping!

c) During storage, protect the machine from weather conditions (moisture, humid-

ity, sea air, fog)! If required, provide the machine with dehumidifying agent and
air tight packaging!

4.2 Information on how to unpack the machine

CAUTION

Risk of injury!

a) To unpack always use proper tools!

b) Use suitable protective clothing!

NOTE

Disposal

a) Provide safe and environmentally friendly disposal of packaging materials!

NOTE

Find out and ascertain any transport damage

a) Inspect the machine for any transport damage immediately after unpacking it.

b) Immediately notify the forwarder any transport damage.

4.3 Packaging with TIP n TELL indicator

Fig. 2:

Indicator not coloured

To check a package equipped with TIP n TELL tilt indicator:

a) check all the TIP n TELL stickers available.

b) If the indicator is not coloured, this means that: the machine was properly

transported.

c) If the indicator has turned blue, this means that: during transport the machine

was excessively tilted.

d) If the indicator has turned blue, this must be specified in the consignment

note!

Ersa GmbH

Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1

30 / 157

Содержание HR 550 XL






























































































































































Результаты поиска

Содержание HR 550 XL

Отзывы:

Похожие инструкции для HR 550 XL

Бренды по названию

Популярные бренды

Kurtz Ersa HR 550 XL, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание HR 550 XL

Отзывы:

Похожие инструкции для HR 550 XL

Бренды по названию

Популярные бренды