Kurtz Ersa HR 550 XL, Перевод оригинального руководства по эксплуатации

Страница: 124 / 157

7 | Tutorial – Soldering or desoldering a component
Activate a soldering profile and prepare the soldering process
7.5 Activate a soldering profile and prepare the soldering process
Open tab [Rework]. The available soldering profiles are listed in the left column.
With regard to this, please also read Chapter Use of the soldering profile in the [Re-
work] tabulator [
} 64].
Notes: If any change is made in tab [Rework], they cannot be saved. With regard to
this, please also read Chapter Temporarily editing the soldering profile in the [Re-
work] tab [
} 62] and the following ones. Only the administrator may save soldering
profiles. With regard to this, please also read Chapter Editing the soldering profile
in the [Profile management] tab and changing it permanently [
} 81] and the follow-
ing ones. Likewise, only the administrator can assign soldering profiles to the stand-
ard user, who can then select them in tab [Rework]. With regard to this, please also
read Chapter The tab with the arrow button [More] under the [Profile manage-
ment] tab [
} 90].
Combined
Rework Archive User administration Profile management
Administration Manual mode
Start
Soldering
Desoldering
Name
Placement
Profile settings
Search
Heater config Information
Board
Component
Control sensor
Adaptor (head)
Lens
pipette
Dip mode
Placement mode
Drop height
IRS
Distance 50 mm
L-head
Pipette 1
No automation
Placement
Heating head
Heating head position
Placement Inspection Soldering Inspection
Desoldering
Soldering Desoldering Synchronize
Process automation
Click on the desired soldering profile to activate it. You can now work with this pro-
file.
Use buttons [Process automation]to enable the desired process steps in the bot-
tom field. The process starts from the left with the first activated process and is
carried on to the right by performing the various process steps. With regard to this,
please also read Chapter The [Process Automation] button row [
}
75].
In the tab line, click on button [Manual mode]to display, in the left window area,
the buttons for manually controlling machine functions such as: pick-and-place
laser, pipette vacuum, heating head procedure, etc. With regard to this, please also
read Chapter The [Manual Mode] [
} 109].
Check all the soldering profile settings, consisting of the chart, the buttons [Process
automation] and the three tabs [Information], [Heater config] and the tab with the
small arrow button (Image processing). If necessary, make corrections.
Ersa GmbH Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1 124 / 157