background image

kurgo.com/product-instructions

4-15

Instructions and care

NOTICE: Please contact Kurgo directly with any product or warranty inquiries.

Kurgo Products  

• 

 2D Fanaras Drive, Salisbury, MA 01952  

  877-847-3868  

  www.kurgo.com  

  [email protected]

KEY

 

S-hook

 

Cam buckle

 

Metal slide

 

Extra Zip Line webbing

 

Bungee & toggle 

 

Zip Line carabiner

 

Harness carabiner

 

Leash nook

A

B

C

D

E

G

F

H

Fig. 4

E

I

A

A

E

A

B

C

D

G

H

F

Installed Zip Line

Back seat

Seatbelt

Tether

SB1

SB2

The following is the recommended set up for the Auto Zip Line. When used in conjunction with a harness it represents the best way to keep 
your pup safe and out of the front seat. Note that the product is intended to restrain your pet and keep it from distracting you while driving, and 
does not guarantee protection from injury in every situation.

Maintain tension on

seatbelt in locked position

while adjusting the other

seatbelt connection

A

SB2

Fig. 1

SB2

K

E

D

Fig. 3

SB2

A

C

E

Fig. 2

Recommended set up for the Auto Zip Line:

1.  Hook the two s-hooks (A) onto the rear passenger seatbelt tabs (SB1/SB2). 
 

The end of the zip line with the cam buckle (B) should be on the driver’s side.

2.  With your left hand, lock the rear driver’s side seatbelt in place by swiftly pulling  
 

down on the seatbelt strap.

3.  With right hand, grab extra zip line webbing (D) and apply constant pressure to the 
 

extra webbing to ensure that the seatbelt stays in the locked position. (see Fig. 1)

4.  With left hand, reach over and lock the passenger seatbelt in position using the same 
 

swift pulling motion.

5.  With the 2 seatbelts in the locked position pull on the extra zip line webbing in your 
 

right hand to remove all slack from the zip line. (See Fig. 2) 

6.  Feed extra webbing (D) through metal slide (C) to secure strap tension.
7.  Roll up extra webbing (D) towards metal slide (C) and secure using bungees and 
 

toggle system (E). (See Fig. 3 & 4). 

8.  Tug on each seatbelt before attaching the dog to ensure they are in the correct 
 

locked position. This should be done before each trip.

9.  Place the zip line carabiner (F) onto zip line.
10. Attach the harness carabiner (G) to your dog’s harness (not included).
11. Locate appropriate leash nook (H) that lets your dog sit up and lay down and 
 

loop onto the carabiner (F) attached to the zip line.

Отзывы: