14
Service Manual
For internal use only
3.
Move the block of the touch controls to the left.
4.
Disconnect the flat cable and remove the
complete block and all of the control elements.
7.3
Removing the electrical components
The hood must be disconnected from the mains power supply before it is cleaned or before any
maintenance work is carried out.
7.3.1
Removing the board
1.
Screw out the two top screws from the exterior of
the hood.
2.
Screw out the two bottom screws on the inside of
the hood.
Содержание KD9875.1
Страница 1: ...Chimney cooker hood KD 9875 1 ...
Страница 6: ...6 Service Manual For internal use only 3 Dimensions ...
Страница 20: ...20 H5 60 85 02 For internal use only 10 Circuit diagram ...