Küppersbusch KD9875.1, Руководство по обслуживанию

Страница: 9 / 20

Service Manual 9
For internal use only
6. Buttons and functions
The extractor hood is equipped with a fully automatic system for administrating all of the available
functions (Advanced Sensor Control). The air in the kitchen stays pleasant and fresh without requiring
any manual controls. The sensitive sensors detect any type of steam, vapours, odours and GAS and
automatically adjust the hood to the required fan power.
Press button “A” to call up this function (see instructions, Item 1).
The extractor hood has numerous other functions too. These can be selected according to your personal
requirements.
The MENU button is used to call up the selected mode and buttons – and + will seek the function to be
set (the function will blink on the display); as soon as the required function has been selected it must be
activated with the OK button. To exit the menu again, press the MENU button.
To switch the motor of the hood on and off press the – button (or the + button); the required speed is
then set.
6.1 Buttons
Button “A” (ASC function)
Press button “A” to activate the sensor function. When the sensor is switched on the hood will au-
tomatically switch on as soon as any type of odour, steam, smoke or heat is generated during the
cooking process. The same applies for any excessive amounts of GAS in the kitchen.
When the sensor is switched on the display will show the corresponding symbol. Press button A to
switch the sensor off. When the sensor is switched on either button – or will be pressed.
This will access the manual function direct and the symbol will be shown.
Lamp button
Switches the lamp on and off.
MENU button
Accesses the different menus.
OK button
For activating the different inputs.
+ and – buttons
For changing the settings within a menu.