Service Manual
13
For internal use only
7.1
Changing the halogen lamp
If the lighting does not work the lamps will firstly need to be checked and you will need to make sure that
the control switch on the control panel of the hood has not developed a fault.
The hood must be disconnected from the mains power supply before it is cleaned or before any
maintenance work is carried out.
Proceed as follows to replace a lamp or lamp mounting:
1.
Open the access flap on the casing of the halogen
lamps.
Press PUSH and let go.
2.
Fold the flap down.
3.
Replace with a new lamp of the same type.
ATTENTION: Never touch a new lamp with your
bare hands.
4.
Checking the functioning.
7.2
Removing the touch controls
The hood must be disconnected from the mains power supply before it is cleaned or before any
maintenance work is carried out.
Should you determine that the control panel circuit board is not functioning, replace it as follows:
1.
Loosen the two screws almost completely (screw
them out anti-clockwise).
2.
Remove the right-hand self-supporting metal
grease filter.
Содержание KD9875.1
Страница 1: ...Chimney cooker hood KD 9875 1 ...
Страница 6: ...6 Service Manual For internal use only 3 Dimensions ...
Страница 20: ...20 H5 60 85 02 For internal use only 10 Circuit diagram ...