Kuppersbusch GKS 324.0-54, Руководство пользователя

Страница: 15 / 25

H2-120-01-01 15
For internal use only
4. Changing of Components
4.1 Disassembly of the Hob
Press the hob out of the worktop from below and remove it.
Do not lever the hob out of the recess with a screwdriver - you
could damage the frame of the hob.
Remove the control knobs.
Remove burner covers, the saucepan support(s) and unscrew
burner flange (see illustration).
Loosen the srews on the side of the case and remove the glass
ceramic plate. Now all internal technical components are accessible.
4.2 Changing of Temperature Sensors
1. Remove hob.
2. Undo sensor at the gas tap.
3. Remove burner
1
by lifting the holder
2
from burner pipe
3
.
Carefully lever connection ring
4
from below the burner and pull out thermostat sensor
5
.
4.3 Changing of Spark Plugs
1. Remove hob.
2. Remove burner
1
by levering the holder
2
from burner pipe
3
. Carefully lever connection ring
4
from below burner and pull out spark plug
6
.
Remove ampere plug at ignition transformation.
Assembly is done in reverse order.
Connection
4
must be pressed on firmly, otherwise spark plug and thermostat sensor will be
too low. When assembling take special care with O-ring
7
. CHECK FOR GAS LEAKS!
6
4
5
1
3
2
7