Kuhnt AS55 Series, Руководство по обслуживанию

Страница: 147 / 173

SERVICE MANUAL AS55X
55Xseries_manual_V3.22 (18-08-15) www.kuhnt.com 145
displayed exactly but in full minute steps. E.g. three connections with each 15 seconds
connection time are shown as 0 minutes. All displayed values are real-time data and will
refresh automatically in local and LAN access. If you use GSM data exchange use the
“Refresh” button to update all displayed data.
This statistics will not be deleted after a firmware update. Non active channels are
highlighted red.
7.11 Restarts
Here you have the option to restart parts of the AS55X or the complete device. First you
have the option to restart all GSM channel. If you use GSM data exchange, you would cut
your own connection. For this reason it´s also possible to restart only one of the GSM
channel.
Finally you have the two options “restart cold” and “restart warm”. Both will restart the
whole device. If you use the “warm” mode, only a few device data will be deleted. This
includes the list “number management” and the “ARP table” (except SIP Server mode). In
addition to the “warm” mode”, the “cold” mode will delete every list. This includes also the
“number management”, the “ARP table” and the “call-setup list”. In both cases the statistic
and the statistics will not be deleted.
7.12 System clock / calendar
Here you have to set the internal clock. It is mandatory for a correct function of the
SimSwitch. But it´s also recommended for other functions (e.g. correct trace data). For more
accurate time settings within your AS55X it´s possible to enable the Daylight Saving Time
rule. Then the AS55X adjusts the time changes by itself.
To set the time in AS55X, it is also possible to import from your computer clock. Therefore
press the “Import computer clock” button on the right side. In some older firmware releases
the correct day must be set manually.
7.13 View SimSwitch status
Here you can check you configuration and the minute counters of your AS550 or AS551
SimSwitch. Therefore you have to configure the AS55X in SimSwitch mode (see 0). All
channels which are configured as SimSwitch will be listed here. On the top you can choose
this configured channel.
You can see how much SIMs are configured for each channel and how many minutes or
short messages are used with each of these SIMs. You can also reset the minute counter or
switch to one special SIM manually. You can identify the currently active SIM by a look at the
“Active” column. The active SIM is marked. The listed minutes are displayed in real-time.
Below the listed minutes, you can see how your abort causes are configured. Finally you
have the option to see the statistic of the last three time slots of each channel.