Kuhnt AS55 Series, Руководство по обслуживанию

Страница: 124 / 173

SERVICE MANUAL AS55X
122 www.kuhnt.com 55Xseries_manual_V3.22 (18-08-15)

Get GSM cell information repetition time in idle mode
For troubleshooting in case of GSM network problems, the information about the
GSM cells can be helpful. Such cases can be the search of the best antenna position
for investigation of GSM call setup problems.
The distances of reading the cell information in idle mode and in active mode (call
present) can be set separately.
The information can be displayed via the trace functions.
Default value: 0 sec.

Get GSM cell information repetition time in active mode
For troubleshooting in case of GSM network problems, the information about the
GSM cells can be helpful. Such cases can be the search of the best antenna position
for investigation of GSM call setup problems.
The distances of reading the cell information in idle mode and in active mode (call
present) can be set separately.
The information can be displayed via the trace functions.
Default value: 0 sec.

SIP OPTIONS request repetition period
The presence detection of the peers in SIP peer mode and of the clients in SIP server
mode is made with a SIP OPTIONS request. This function can additionally work as
NAT keep alive.
With this setting, the distance of two OPTIONS requests can be specified.
Default value: 10.00 sec.

SIP registration repetition
In SIP client mode, the AS55X must register at its server for a period of time and then
the registration must be repeated. If you choose a short period, the LAN load is high.
A too long period may cause problems when working via a DSL modem if you are
getting a new public IP address. The value of 300 seconds is a good compromise.
Default value: 300 sec.