HR3004D-3504D
46
6. - Putting into service
KN207JGB_D
Power harrow
- Attach PTO shaft guard chain in hole (1) on
machine side.
- Immediately replace any worn or damaged
guard.
6.1.6 Cam type cut-out clutch
The PTO shaft is factory fitted with a cam type cut-
out clutch.
- Check that cut-out clutch disengages during the
first period of use:
• If the cam type cut-out clutch disengages too
frequently, the adjustment is too light.
- See section:
•
Putting into service / Coupling and
uncoupling / Cam type cut-out clutch / Cam
type cut-out clutch adjustment.
If the cam type cut-out clutch does not disengage,
the adjustment is too heavy.
- See section:
•
Putting into service / Coupling and
uncoupling / Cam type cut-out clutch / Cam
type cut-out clutch adjustment.
The cam type cut-out clutch is based on the
principle of disengaging cams that release when an
overload occurs. When the cut-out clutch releases,
it cuts-out torque transmission to the machine.
1
