KUHN GMD2810-FF, Руководство оператора

Страница: 51 / 92

Maintenance and storage
Disc mower
GMD2810-FF
49
2. Lubrication
Except for the secondary PTO shaft lubrication, the
machine must be placed in transport position for all
maintenance operations (knife replacement, lubrication,
etc).
Clean grease nipples before greasing.
PTO shaft
Primary PTO shaft
- Every 8 hours:
• universal joints (1).
- Every 20 hours:
• transmission tube (2).
- Every 40 hours:
• guide rings (3).
Secondary PTO shaft
- Every 250 hours:
• universal joints (1).
• transmission tube (2).
• guide rings (3).
The grease zerks of the secondary PTO shaft U-joints
and guiding bushes are accessible by unlocking the 2
clips of the 2 guard cones (1).
The profiled tubes are lubricated by grease zerk (3):
- Slide the black collar (2).
- If necessary, rotate a disc to access the grease zerk.
- Slide the black collar back in place when lubrication
has been completed.
Lubricate with SHELL multi-purpose grease
grade NLG
I
2.
Place the machine in working position.
Stop the tractor engine and remove ignition
key.
1 1
3
3
2
1
3
1
2