4. - Safety
GMD16-GMD20
23
KN225BGB_A
Disc mower
- Do not install any adapter device that results in a
portion of the tractor PTO stub, the rotating PTO
shaft, or the adapter to be unguarded. The tractor
master shield shall overlap the end of the splined
shaft and the added adaptor device as outlined in
the table.
PTO type
Diameter
X splines
A ±5 mm
(0.20’’)
1
35 mm (1.378’’)
6
85 mm (3.35’’)
2
36 mm (1.42’’)
8
85 mm (3.35’’)
3
35 mm (1.378’’)
21
85 mm (3.35’’)
4
45 mm (1.772’’)
20
100 mm (4.00’’)
5
44 mm (1.732’’)
6
100 mm (4.00’’)
- When uncoupling the machine, rest the PTO shaft
on the support specially provided, and replace
protective shield on the PTO stub of the tractor.
- Read and follow the instructions in the operator's
manual provided with the PTO shaft.
4.2.11 Waste disposal
- Respect the environment! Never spill pollutants
(oil, grease, filters, etc.) on the ground, never pour
them down the drain and never discard them in any
other place where they could pollute the
environment. Never throw away or burn a tyre.
Always take waste to specialized recycling or
waste disposal centers.
A
