FC244/D/-FF/D-FF
136
10. - Maintenance and storage
KN329CGB_A
Mower conditioner
10.5.3 Storage
• 139884: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 139885: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 139886: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 139888: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134014: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134062: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134063: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134064: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134192: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
10.6 Dismantling and scrapping of the
machine
At the end of the machine's life, the various machine components must be disposed of or recycled in
compliance with local regulations in force.
- Make sure the machine is stable (parking stands, holders, slings, etc.) prior to carrying out any repair or
maintenance.
- Do not grind or drill on the shell of the hydro-pneumatic accumulator. Always empty and recover the oil of
the machine's gearboxes and the hydraulic circuit to entrust it to waste oil recycling companies.
- Empty fluids or components such as coolant, cooling liquid, brake fluid, batteries, filters and entrust them
to a specialized company.
- Cut the electric power prior to carrying out any repair or maintenance on the circuits or electric/electronic
components. Entrust electronic waste such as control box, wiring harness... of the machine to a
specialized company.
- Separate the metal components, plastic components and rubber components and entrust them to
specialized companies.
