KUHN AXIS 20.1, Руководство оператора

Страница: 92 / 216

Commissioning A
80
AXIS-GENERAL
AXIS
20.1
A.3 Filling up the solid fertiliser broadcaster
Instructions for filling the solid fertiliser broadcaster:

Close the metering slide and if necessary, also the ball cocks (versions
K + R).

Fill up the solid fertiliser broadcaster only when it is mounted on the tractor.
Make sure that the tractor is standing on flat, firm ground.

Secure the tractor to prevent movement. Set handbrake.

Shut off the engine of the tractor. Remove the ignition key.

For filling levels above 1.25 m, use special equipment e.g. front loader or
screw conveyor to fill the solid fertiliser broadcaster.

Fill the solid fertiliser broadcaster no higher than the top edge. Check the fill
level, e.g. through the view window in the hopper (depending on model).
n
DANGER
Danger from running engine
Working on the solid fertiliser broadcaster with the engine running
can lead to serious injuries caused by mechanical components or
escaping fertiliser.
Never fill the solid fertiliser broadcaster with the tractor engine run-
ning.
 Turn off tractor. Remove the ignition key.
n
CAUTION
Authorized gross weight exceeded
If the authorized gross weight is exceeded, it will affect the oper-
ating and traffic safety of the vehicle (solid fertiliser broadcaster
and tractor) and may cause serious damage to the machine and
environment.
 Before filling up, please determine the possible volume that
can be filled.
 Do not exceed the authorized gross weight.