Safety
9
3
AXIS-GENERAL
3.5.3
Inspection before startup
Before the first and every subsequent operation, thoroughly inspect the solid fer-
tiliser broadcaster to make sure that it is safe to operate.
Is all safety equipment on the solid fertiliser broadcaster installed and func-
tional?
Are all attachments and load bearing assemblies tight and in a proper condi-
tion?
Are the spreading discs and their fasteners in good condition?
Are the protective grids in the hopper closed and locked?
Is the test dimension of the protective grid interlock within the proper range?
See
Is there anyone in the danger zone of the solid fertiliser broadcaster?
Is the shaft cover in proper condition?
3.5.4
During operation
If the solid fertiliser broadcaster malfunctions, turn the machine off and se-
cure it immediately. Have the machine repaired by qualified personnel.
Never climb up on to the solid fertiliser broadcaster when it is operating.
Use the solid fertiliser broadcaster only with protective grid in the hopper
closed. The safety guard must not be opened or removed during operation.
Rotating parts of the machine can cause severe injury. Therefore, always
make sure that body parts or items of clothing never come close to the rotat-
ing parts of the machine.
Do not place any objects (such as screws, nuts) in to the spreader hopper.
Grit is flung from the machine at a high speed and can cause serious injury,
e.g. to the eyes. Make sure that there are no persons within the spreading
range of the solid fertiliser broadcaster.
If the wind speed is too high, you should stop the spreading operation, as the
spreading accuracy cannot be ensured.
Never climb up the solid fertiliser broadcaster or the tractor if you are beneath
a high tension power line.
3.6
Fertiliser
Improper selection or use of fertiliser may cause serious injury or environmental
damage.
When you choose a fertiliser, make sure you are properly informed about its
effects on humans, the environment and the machine.
Please note the fertiliser manufacturers instructions.
Содержание AXIS 20.1
